Workmanship shall be in accordance with mil-hdbk-454; remove and discard circuit breaker on-off plate; torque threaded fasteners as follows: .112-40-3to5 in/lb (connectors, cover mtg).138-32-5 to 8 in/lbs(circuit breaker terminals).164-32-8 to11 in/lbs(tb1, tb2 mounting/terminals); .190-32-11 to 15 in/lbs(e1, enclosure mtg); mark find no.40 wire markers, per wiring table, sheet 2 and locate at all applicable wire terminations.Mark with .19 high characters per mil-std-130 using black ink per a-a-208; rubber stamp or stencil the following markings in accordance with mil-std-130 using black ink a-a-208 at location shown.Character size shall be .13 +/- .02 high.(01365assy97008a3100)
An enclosure which includes mounts, and protects such items as switches, circuit breakers, jacks, fuseholders, connectors, terminals and/or terminal boards, resistors, capacitors, transformers, and the like. It is primarily designed to distribute electrical power from one or more primary power source(s) such as generator(s) and battery(ies) to one or more electrical and/or electronic item(s). It may include a cover or door. For enclosures which include only circuit breakers, switches, jacks, fuseholders, terminals and/or terminal boards, see circuit breaker box; switch box; jack box; fuse box and terminal box. For enclosure primarily designed to interconnect two or more electrical and/or electronic items, except primary power source(s) see interconnecting box. For empty boxes which are designed to mount, but do not include electrical devices such as switches, jacks, fuseholders, terminals and/or terminal boards, see junction box. See also interconnecting cabinet; control (as modified); panel (1) (as modified); relay assembly; panel, power distribution; switchboard (as modified) and panel, fuse. Excludes connector-switch.
14.000 inches overall depth, 1.740 inches overall height, 16.750 inches overall width, any acceptable mounting method, tubine stm m end item identification
Food mixer 40qt mdl d340 end item identification
Panel
Panel
Controller, whip hoist f047333. End item identification, controller, whip hoist.
NSN 5975-00-458-9145
NSN 7021-00-197-1961
NSN 1285-01-106-2890
NSN 5831-00-800-3204
NSN 5840-01-340-4416
NSN 1430-00-103-5270
NSN 5820-01-265-0751
NSN 1240-01-122-1073
NSN 7050-01-215-2441
NSN 1240-00-363-7510
NSN 5895-00-867-0739
NSN 6675-01-649-3049
Last modified 05/14/2024