2 mounting holes 0.156 in. Or 0.218 in. Diameter on 1.500 in. C to c; body dim. 0.922 square; 2 weld tabs 0.406 in. H; 2 male quick-connect wire leads bent 45 degrees angle; 7-45 amps motor 2-7.500 hp
A protective device specifically designed to prevent damage to an electrical motor due to failure of the motor to start, severe overloading of short duration, too frequent starting, high ambient temperature, high or low circuit voltages, failure of ventilation or any combination thereof. It is designed to be either automatically or manually reset. Excludes circuit breakey; switch (1), thermostatic; heater, thermal release; and relay (1), thermal.
14.000 inches overall depth, 1.740 inches overall height, 16.750 inches overall width, any acceptable mounting method, tubine stm m end item identification
Food mixer 40qt mdl d340 end item identification
Panel
Panel
Controller, whip hoist f047333. End item identification, controller, whip hoist.
NSN 5805-01-366-9845
NSN 7050-01-535-0461
NSN 7450-01-254-3885
NSN 5836-01-252-7898
NSN 5805-01-408-5167
NSN 5820-00-126-4678
NSN 5836-01-265-1093
NSN 1430-01-097-5730
NSN 7021-01-091-2147
NSN 5805-01-556-0533
NSN 6675-01-310-3331
NSN 5810-01-236-8961
Last modified 05/16/2024