4PJ5050C1

4PJ5050C1 Description

AN/FYQ-109 end item identification, input power rqmt: 1100 watts max, 1550 volt-amps max; projector is provided w/status indicators & test points to monitor circuit performance & a switchable meter to check light valve operating parameters; storage temp: M25 DEG/P50 deg centigrade; all modules use solid-state devices; finish: painted foamed Noel or Texan covers over an aluminum frame; projector weight: 140 lbs; o/a dimensions in inches: 22.000 high, 17.000 wide, 32.000 long; contrast ratio: 75 to 1 max, 50 to 1 min when measured in negligible ambient light; picture size: variable width of two ft to 25 ft for front or rear projection, the sweeps may be reversed horizontally or vertically for rear projection by use of built-in switches .

Features

Input power rqmt: 1100 watts max, 1550 volt-amps max; projector is provided w/status indicators & test points to monitor circuit performance & a switchable meter to check light valve operating parameters; storage temp: m25 deg/p50 degrees centigrade; all modules use solid-state devices; finish: painted foamed noryl or lexan covers over an aluminum frame; projector weight: 140 lbs; o/a dimensions in inches: 22.000 high, 17.000 wide, 32.000 long; contrast ratio: 75 to 1 max, 50 to 1 min when measured in negligible ambient light; picture size: variable width of two ft to 25 ft for front or rear projection, the sweeps may be reversed horizontally or vertically for rear projection by use of built-in switches