5.470 inches overall length, 2.690 inches overall height, 3.100 inches overall width, sea wolf class ssn instrumentation end item identification.
Emeasurement range: +/- 90 degrees; alignment error less than 1 percent; non-linearit (full-range): less than 0.05 percent; reliability: less than 0.003 milliamperes; output temperature sensitivity: less than 100 ppm/deg c; bias: 12ma ; bias temperature sensitivity: less than 0.003 ma/deg c; noise(0-1000hz): less than 0.002 ma rms; natural frequency: 30hz ; bandwidth (-3db) : 30hz ; insulation resistance test: greater than or equal to 10 mega ohms; has 2 dedicated conductors for self-test feature; material: qq-s-763, class 316l; passivated per qq-p-35; electrical connector: seacon m24217/5-002; mating plug: seacon m24217/7-004 with 4 ft. Length 2swf-3 cord attached; protective caps
An inclinometer consisting of a pendular system and an optical position sensor. When the pendular system is inclined, it's position is detected and converts in an electric current which actuates a galvanometer. The electric current, which is proportional to the detected gravity component, is measured on a resistance terminal. The calibrated voltage obtained is converted in an angle value on a digital display.
Spool Drive
Spool Drive
Spool Drive
Spool Drive
Glass Bezel
NSN 5840-01-162-4624
NSN 5820-01-323-7827
NSN 1240-01-192-4168
NSN 1240-01-387-6729
NSN 5815-01-433-6341
NSN 6760-01-101-4146
NSN 7450-01-139-5103
NSN 1430-00-863-1100
NSN 7021-00-346-2534
NSN 6605-00-496-2262
NSN 1285-01-220-1541
NSN 7021-01-215-1091
Last modified 11/12/2024