Hexagon Head Cap Screw

Name: Hexagon Head Cap Screw
SKU: 5305000680509
Availability: InStock

802206

(NSN) National Stock Number

5305-00-068-0509

Federal Supply Classification

5305 Screws

Item Name Code

18257

Schedule B Code

7318152000

Summary

2a thread class, right-hand thread direction, 0.750 inches minimum and 0.938 inches maximum thread length, 1.250 inches nominal fastener length, hexagon head style, 0.150 inches minimum and 0.163 inches maximum head height

DAC	HCC	DMIL	RNCC
5	-	-	E

RNVC	SADC	MSDS	RNAAC
8	-	-	ZZ

Identification

An externally threaded fastener designed for insertion into holes in assembled parts, for mating with a preformed internal thread and for tightening or releasing by torquing the head. The threaded and unthreaded portions are both of the same nominal diameter of 0.190 inch (5 mm) or larger. Head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. The thread length being the controlled dimension, the grip length is not specified. A locking feature may be incorporated in the design of the head or threads. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. Excludes:bolt,machine; bolt,externally relieved body; bolt,internal wrenching; and screw,cap,socket head.

INC	FIIG	Concept	Condition
18257	A003B0	-	1

Specifications

Thread Class

Details

A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.

Thread Direction

right-hand

Details

The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.

Thread Length

0.750 inches minimum and 0.938 inches maximum

Details

A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.

Fastener Length

1.250 inches nominal

Details

The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.

Head Style

hexagon

Details

The style designation indicating the configuration that most nearly corresponds to the appearance of the head.

Head Height

0.150 inches minimum and 0.163 inches maximum

Details

A measurement from the bottom to the top of the head,in distinction from depth.

Width Between Flats

0.428 inches minimum and 0.438 inches maximum

Details

None.

End Item Identification

mrap rg-33 and rg-33 auv; multiple launch rocket system (mlrs); armored multi-purpose vehicle (ampv); a4 bradley fighting vehicle; a3 bradley fighting vehicle

Details

The national stock number or the identification information of the end equipment for which the item is a part.

Nominal Thread Diameter

0.250 inches

Details

The nominal length of a straight line which passes through the center of the threaded portion,and terminates at the circumference.

Thread Quantity Per Inch

Details

The number of threads on the item per linear inch measured on a line parallel to the thread axis.

Minimum Tensile Strength

150000 pounds per square inch

Details

The maximum rated load in tension applied in a longitudinal direction,per unit of cross-sectional area,that the material can withstand without rupture.

Hardness Rating

33.0 rockwell c minimum and 39.0 rockwell c maximum overall

Details

A numeric value that reflects the hardness of an item when used in conjunction with a hardness rating scale.

Minimum Yield Strength

120000 pounds per square inch

Details

The stress at which a material exhibits a specified limiting deviation from the proportionality of stress or strain.

Material

steel overall

Details

The chemical compound or mechanical mixture properties of which the item is fabricated.

Material Document And Classification

sae j429,grade8 assn std single material response or astm a354,grade bd assn std single material response overall

Details

The specification, standard, or manufacturer's reference and the classification designation, such as class, condition, temper, and the like, that identifies the material.

Surface Treatment

zinc and chromate overall

Details

The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.

Surface Treatment Document And Classification

astm b633 ty 2 sc 3 assn std single treatment response overall

Details

The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.

Thread Series Designator

unc

Details

A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.

Master-Cross Reference List

Part	CAGE	DAC	HCC	RNCC	RNVC	MSDS	RNAAC
10082362	A486G	9	-	6	9	-	WF
02101392	D9182	6	-	C	1	-	ZZ
S105C	D9182	6	-	C	1	-	ZZ
SC1434	D9182	6	-	C	1	-	ZZ
197012	A00AM	9	-	6	9	-	YP
5305-071-2241	A00AM	9	-	6	9	-	YP
5305000680509	A00AM	9	-	6	9	-	YP
5305000712241	A00AM	9	-	5	9	-	YP
251390	H0001	4	-	5	9	-	ZZ
5305PL0725561	9009H	9	-	6	9	-	WP
22492R1	66195	4	-	3	2	-	ZZ
1473342PC79	53711	6	-	C	1	-	ZZ
6300757-10	53711	C	-	3	2	-	ZZ
B1821AH025C125N	80204	E	-	5	9	-	ZZ
B1821BH025C125N	80204	E	-	5	9	-	KZ
22492R1	55820	4	-	5	9	-	ZZ
201988	24234	4	-	5	9	-	ZZ
91236A544	39428	E	-	C	1	-	TU
121913	80195	6	-	C	1	-	ZZ
41UT4103-4PC74	81340	6	-	C	1	-	ZZ
07-0994	11862	4	-	5	9	-	ZZ
9433298	11862	4	-	5	9	-	ZZ
800-1008	44940	4	-	5	2	-	ZZ
AES01C250A25AW9A91	05047	E	-	3	2	-	ZZ
1C6885P22	07482	6	-	C	1	-	ZZ
B0405	25567	4	-	5	2	-	ZZ
197-012	72741	E	-	C	1	-	KZ
860-012	72741	E	-	C	1	-	KZ
82-2063-0125	04664	6	-	C	1	-	ZZ
2DD115	45152	5	-	5	9	-	ZZ
2DD115	75Q65	5	-	5	2	-	ZZ
MS35291-10	96906	4	-	5	9	-	9Z
MS90725-10	96906	X	-	5	9	-	XX
MS90728-10	96906	E	-	5	9	-	KZ
802206	02280	5	-	E	8	-	ZZ