Dynamic Microphone
M-30A/U
(NSN) National Stock Number
5965-00-050-8167
Federal Supply Classification
5965 Microphones and Speakers Handsets Headsets
Item Name Code
00362
Schedule B Code
8518903000
Summary
Hand held body style, 1.188 inches nominal diameter, 4.500 inches nominal length, connector accessory components, +300.0 to 4000.0 frequency response range in hertz, 150.0 ohms nominal impedance rating
| DAC | HCC | DMIL | RNCC |
|---|---|---|---|
| 6 | - | - | 5 |
| RNVC | SADC | MSDS | RNAAC |
|---|---|---|---|
| 1 | - | - | TX |
Identification
A microphone which depends for its operation upon the generation of an electromotive force by the motion of a moving coil within a magnetic field.
| INC | FIIG | Concept | Condition |
|---|---|---|---|
| 00362 | A06400 | 1 | 1 |
Specifications
Body Style
hand held
Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the body.Diameter
1.188 inches nominal
Details
The length of a straight line which passes through the center of a circular figure or body,and terminates at the circumference.Length
4.500 inches nominal
Details
A measurement of the longest dimension of any object,in distinction from width.Accessory Components
connector
Details
The additional parts supplied with the item which may be required for application.Frequency Response Range In Hertz
+300.0 to 4000.0
Details
The minimum and maximum frequencies to which the item will respond,expressed in hertz.Impedance Rating
150.0 ohms nominal
Details
The total opposition /resistive and reactive/ to the flow of alternating current.Output Sensitivity Rating In Decibels
-52.0
Details
The rating indicating the ratio of the output voltage or power to the input voltage or power at a specified reference energy level,expressed in decibels.Output Sensitivity Rating Reference
10 dynes per sq centimeter
Details
The electrical output rating and sound pressure input rating which are used as a base reference for the measurement of the sensitivity of an item.Polarity Connection
not required
Details
An indication of whether or not the item requires a specific polarity for connection into the operating circuit.Sound Pickup Directional Type
omnidirectional
Details
Indicates the specific type of sound pickup which determines the performance of the item.Electrical Connection Type
integral cable
Details
Indicates the type of electrical connection included on the item.Extended Cable Length
15.0 feet nominal
Details
A measurement of the longest dimension of a cable or cord when fully extended.Cable Conductor Quantity
3
Details
The number of conductors,shielded and unshielded,which make up the cable.Cable Shielded Conductor Quantity
1
Details
The number of insulated conductors within the cable that are inclosed in an electrical shield.Mounting Method
clip
Details
The means of attaching the item.Test Data Document
81349-mil-m-11051 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.).
Details
The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.Master-Cross Reference List
| Part | CAGE | DAC | HCC | RNCC | RNVC | MSDS | RNAAC |
|---|---|---|---|---|---|---|---|
| 8219 | 87771 | 5 | - | C | 1 | - | TX |
| 647AXLR3-12C | 81134 | 6 | - | 5 | 9 | - | TX |
| M30RPL | 55564 | 6 | - | 3 | 2 | - | TX |
Material and Special Handling
Hazardous material, precious metals, criticality, and electrostatic discharge indicators.
| HMIC | PMIC | ESD/EMI | Criticality |
|---|---|---|---|
| P | U | - | - |
Freight
Universal / National Freight and Handling Information
| UFC | HMC | LTL | LCL |
|---|---|---|---|
| 87660 | - | W | - |
| RVC | WCC | TCC | SHC |
|---|---|---|---|
| - | 72D | Z | 9 |
Certified Supplier
Order with confidence. We are a valued certified supplier serving customers in the military and aerospace industries.
- ISO9001 / AS9100 Quality Standards
- HAZMAT Certified
- On Time Delivery
- Qualified sales team
- Counterfeit Parts Prevention
- 100% Product Inspections
Manufacturer
FAQs
Frequently asked questions for NSN 5965-00-050-8167
What is the NIIN of the NSN 5965-00-050-8167?
The National Item Identification Number (NIIN) of the NSN 5965-00-050-8167 is 00-050-8167
When the NSN 5965-00-050-8167 was assigned to the Federal Catalog?
It was assigned 62 years ago, on Tue, Jan 1, 1963
Does the NSN 5965-00-050-8167 contain any precious metals?
Type/content is unknown
Does the NSN 5965-00-050-8167 contain any hazardous material?
No information in HMIRS
Can't Find It
If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.
Similar Products