C8843-1
Electrical cable protector
Properties of C8843-1
End Application:
F16-aircraft
General Description:
Boot is 1.00 in min diameter with 3 cable inlets .50 in min dia; flanged grommet has .37 in diameter ref with 3 cable cutouts .25 in plu or minus .025 in dia, out cable holding lip 1.07 in plus or minus .100 in and outside diameter is 1.25 in plus or minus .250 in dia; feedthrough is 1.870 in plus or minus .031 in outer diameter and 1.04 in plus or minus .031 inner dia, 1 silicone o-ring seal, throat is 1.250-18 unef-2a thread (self locking) with washer and 1.750 in plus, or minus .031 in diameter retaining nut, lip is .920 in minus .015 in out diameter and .68 in inner diameter .135 in w, feedthrough is 1.00 in max w
Description:
Protector,cable,electrical
Related Parts
-
KTMS501-4(4) Sleeve, Marker, Cable
Sleeve
-
KTMS501-4(3) Sleeve, Marker, Cable
Sleeve
-
KTMS501-4(A) Sleeve, Marker, Cable
Sleeve
-
KTMS501-4(5) Sleeve, Marker, Cable
Sleeve
-
102735 Case, Standardized Components, Ele
Case
Stock Availability
Instructions:
Enter your basic contact information and submit the form below. You will receive
an email with pricing and availability for this part number.
Hot Parts
Discover New Parts and Parts You Need