2 mounting holes 0.156 in. Or 0.218 in. Diameter on 1.500 in. C to c; body dim. 0.922 square; 2 weld tabs 0.406 in. H; 2 male quick-connect wire leads bent 45 degrees angle; 7-45 amps motor 2-7.500 hp
A protective device specifically designed to prevent damage to an electrical motor due to failure of the motor to start, severe overloading of short duration, too frequent starting, high ambient temperature, high or low circuit voltages, failure of ventilation or any combination thereof. It is designed to be either automatically or manually reset. Excludes circuit breakey; switch (1), thermostatic; heater, thermal release; and relay (1), thermal.
14.000 inches overall depth, 1.740 inches overall height, 16.750 inches overall width, any acceptable mounting method, tubine stm m end item identification
Food mixer 40qt mdl d340 end item identification
Panel
Panel
Controller, whip hoist f047333. End item identification, controller, whip hoist.
NSN 7050-01-444-2248
NSN 5975-01-584-4214
NSN 6940-01-126-1794
NSN 6110-01-548-6856
NSN 5805-01-175-2447
NSN 1430-01-451-4322
NSN 5820-01-417-7133
NSN 6760-00-392-9889
NSN 5810-01-063-7571
NSN 5895-01-540-8568
NSN 7050-00-294-2698
NSN 7050-01-125-1749
Last modified 09/21/2024