Interface between electronic control modul (ecm) and the digital data reader (ddr) for purpose of dispplaying diesel engine parameters and malfunctions stored in the ecm; the diagnostic module (dm) shall flash out codes stored in the ecm when the diagnostic swith is toggled; the connection of the dm to the ecm shall be made via detroit diesel connector 023513052; adjustments shall be provided for the setting engine idle speed above 600 rpm, engine rated speed to produce 400 hz+/- 2 hz generator output and engine overspeed at 2050+/- 50rpm; the dm shall provide a dc signal to the engine fault module for low oil pressure and high engine temperature stutdown; the dm shall operate on 22-29 vdc voltage range; apply p/n 21269 d624-2516a permil-std-130 appro. Where shown.
An enclosure which includes mounts, and protects such items as switches, circuit breakers, jacks, fuseholders, connectors, terminals and/or terminal boards, resistors, capacitors, transformers, and the like. It is primarily designed to distribute electrical power from one or more primary power source(s) such as generator(s) and battery(ies) to one or more electrical and/or electronic item(s). It may include a cover or door. For enclosures which include only circuit breakers, switches, jacks, fuseholders, terminals and/or terminal boards, see circuit breaker box; switch box; jack box; fuse box and terminal box. For enclosure primarily designed to interconnect two or more electrical and/or electronic items, except primary power source(s) see interconnecting box. For empty boxes which are designed to mount, but do not include electrical devices such as switches, jacks, fuseholders, terminals and/or terminal boards, see junction box. See also interconnecting cabinet; control (as modified); panel (1) (as modified); relay assembly; panel, power distribution; switchboard (as modified) and panel, fuse. Excludes connector-switch.
14.000 inches overall depth, 1.740 inches overall height, 16.750 inches overall width, any acceptable mounting method, tubine stm m end item identification
Food mixer 40qt mdl d340 end item identification
Panel
Panel
Controller, whip hoist f047333. End item identification, controller, whip hoist.
NSN 5995-00-806-7212
NSN 5975-01-634-0678
NSN 6110-01-484-9328
NSN 7021-01-601-3820
NSN 5895-00-211-7193
NSN 7050-00-241-6114
NSN 6605-00-654-7000
NSN 5840-00-665-2964
NSN 6110-01-054-3032
NSN 7021-01-040-6917
NSN 5836-01-447-0472
NSN 6760-00-611-9508
Last modified 05/17/2024